welcome to my store , Hope you have a pleasant shopping trip!
1. M: Manual button: press and hold the M button to enter manual mode without affecting the time program setting.
2. +/-: Time increase or decrease button: press and hold to increase or decrease time.
3. AUTO: After all settings are complete, press AUTO again. At this time, the display shows that the current time and the time until the next watering time are beating each other.
4. SET CLOCK: After pressing this button, you can set the current specific time by pressing the +/- buttons. You can press and hold the +/- sign to automatically add and subtract.
5. START TIME: Press this button once to enter the setting start watering time mode, and you can design the required time by long pressing the +/- sign.
6. OFF: Turn off the timer button, press once to turn off the timer cryo.
7. HOW LONG: Press this button to enter the setting watering time mode. You can design the required time by long pressing the +/- sign. The time range can only be measured in minutes, such as 1-300 minutes.
8. HOW OFTEN: Press this button to enter the setting watering interval time mode, which can be set every 1-7 days, with an interval of 6 hours or 12 hours.
9. RESET: Press this button once to reset the machine and clear all setting programs.
1 two fingers break the card slot
2 open the battery cover
3 install two AA 1.5V batteries
4 put in the connector
1X Water Timer